Training Courses

This one day course provides personnel with a thorough understanding of the potential hazards and management controls required to carry out work in confined spaces safely.

This half-day course introduces the principles and equipment involved in H₂S detection and response. The course is aimed at all personnel who work within an environment where H₂S may be present. The H₂S course contains theory input, demonstrations and practical...

OPITO AUTHORISED GAS TESTER

The Authorised Gas Tester role is critical in testing for and ensuring safe working atmospheres, in particular: permit controlled confined spaces, and prior to and during hot work. This course is designed to provide the basic training, knowledge, assessment and...

CONFINED SPACE FOR MANAGERS/SUPERVISORS

This one-day course will provide delegates with an understanding of the roles, responsibilities and requirements for a safe and systematic approach to confined space operations. A mixture of theory and practical work, the course is aimed at Managers, Safety...

COMBINED WORKING AT HEIGHT, RESCUE AT HEIGHT, CONFINED SPACE ENTRY AND RESCUE

The Work at Height and Rescue elements of this course are aimed at personnel who use work at height equipment in the execution of their duties, who have responsibility for at-height operations, or may oversee the rescue/recovery of a casualty. The course will...

OPITO GAS MONITOR

The tasks Gas Monitors are required to undertake may vary depending on the workplace operation at the time. The tasks also vary in complexity and responsibility. This course is designed to meet the initial training and knowledge assessment requirements for personnel...

CONFINED SPACE ENTRY AND RESCUE

This two day course provides personnel with a thorough understanding of the potential hazards and management controls required to carry out work in confined spaces safely. The course combines classroom-based and practical learning, although the emphasis is on...

Breathing Apparatus Training

This course is designed to provide delegates with a basic level of knowledge and understanding to allow them to operate breathing apparatus safely and with confidence. During this one day course delegates will receive instruction on the safe use and operating...

Health and Safety

COSHH ASSESSOR

The aim of this course it to provide delegates with an understanding of handling of substances hazardous to health and of the control of substances hazardous to health regulations and to help delegates understand how substances hazardous to health cause harm in order...

RISK ASSESSMENT

This half-day course introduces the principles involved in identifying, assessing and putting in place controls to minimise risks encountered within the workplace. The course is aimed at personnel who may be required to use or complete a Risk Assessment as part of...

VEHICLE MARSHALLING

This course is relevant to persons responsible for marshalling other vehicles and pedestrians whilst a vehicle is reversing/manoevering.

SURFACE PREPARATION – BRISTLE BLASTING PROCESS ‘BLASTING WITHOUT GRIT’

This one day course provides delegates with a thorough understanding of the HSE Rigging Loft criteria, with emphasis on regulations and management. This course is particularly pertinent to those who have been appointed as Competent Person under LOLER Regulation 9.

MANUAL HANDLING ASSESSOR

The manual handling assessor course has been designed to provide delegates with an awareness of the manual handling operations regulations and to also provide knowledge and understanding of how to manage manual handling operations safely and reduce the risk of injury...

IOSH MANAGING SAFELY

Managing safely is for managers and supervisors in any sector, and any organisation. It’s designed to get managers up to speed on the practical actions they need to take to handle health and safety in their teams.

FIRE EXTINGUISHER

The Fire Extinguisher course has been designed to give a basic level of understanding and competence in how to identify and utilise First Aid Fire Fighting Equipment.

ASBESTOS AWARENESS AND NON-LICENSED WORK

The information provided in this Asbestos Training is based on the Control of Asbestos Regulations 2012, Approved Code of Practice L143 2nd edition, “Managing and Working with Asbestos”. The course is divided into 2 main areas of training: Asbestos Awareness: This...

SPILL AWARENESS

This accident and incident investigation course has been designed to provide delegates with the knowledge to safely use the spill products that are provided to them by employers at their work site and to highlight the importance of having a simple and effective...

PUWER AWARENESS

The course will provide delegates with knowledge on the provision and use of work equipment regulations (PUWER) and how they apply in the workplace. The course is a mix of the theoretical and practical sessions, during which delegates will be required to demonstrate...

Rigging and Lifting

GANTRY CRANE OPERATOR

Operators will be trained or assessed in the safe use of a Gantry Crane and associated lifting accessories. The course comprises classroom based review and discussion of legislation, responsibilities, equipment and techniques used although emphasis will be placed on...

LIFTING EQUIPMENT INSPECTION

This one day course provides delegates with a thorough understanding of the requirements for the identification and inspection of lifting equipment. this course is particularly pertinent to those who have been appointed as competent person under LOLER Regulation 9.

OPITO INTRODUCTION TO RIGGING – STAGE 1

The OPITO Stage 1 Rigger training course is widely recognised as the industry standard introductory course, delegates undertaking and successfully completing the course will be able to demonstrate the knowledge, skills and competence to begin the second stage of their...

OPITO RIGGER ASSESSMENT – STAGES 3 & 4

This course is designed for rigging and lifting personnel who require to be assessed to the OPITO Stage 3 or Stage 4 standard. The standard identifies the basic competencies and safety training required by the UK offshore Oil & Gas industry for personnel involved...

RIGGING LOFT MANAGEMENT

LOLER SUPERVISOR/FOCAL POINT

This two day course is designed to provide supervisors with a thorough understanding of the LOLER regulations and requirements to allow them to set up controls and systems to implement LOLER requirements and to develop appropriate Risk Assessments and Lifting Plans...

LOLER LIFT PLANNER

This one day course provides delegates with a thorough understanding of the LOLER regulations and requirements to allow them to develop appropriate Risk Assessments and Lifting Plans for a given task.

LOLER COMPETENT PERSON (LCP)

This course is intended for personnel appointed as an organisation’s LOLER Competent Person. The LOLER Competent Person plans or approves all lifting operations in the workplace and ensures lifting operations comply with LOLER regulations and company procedures.

Transport and Dangerous Goods

DANGEROUS GOODS BY AIR (CAA / IATA APPROVED)

The objective of this course is to ensure that students can prepare a Dangerous Goods Shipment in accordance with the Requirements of the IATA Dangerous Goods Regulations or verify that a Dangerous Goods Shipment has been properly prepared for acceptance by an...

DANGEROUS GOODS BY SEA REFRESHER

The objectives of this course are to ensure that students can:Prepare a dangerous goods shipment in accordance with the requirements of the IMDG CodeUnderstand and apply the IMDG Dangerous Goods RegulationsUnderstand their responsibilitiesClassify dangerous goods...

DANGEROUS GOODS BY SEA

The objective of this course is to ensure that students can prepare any Dangerous Goods Shipment in accordance with the requirements of the IMDG Code. Aimed at Shippers, Packers, Freight Forwarders/Cargo Agents processing...

DRIVER CPC MODULE 3 (MANUAL HANDLING & CUSTOMER CARE)

To provide Drivers with the instruction required by the Driving Standards Agency (DSA) and JAUPT in order to obtain their Driver Qualification Card (DQC). Driver CPC training is a requirement for most LGV drivers under the new Driver CPC Regulations. Drivers are...

DRIVER CPC MODULE 5 (EMERGENCY FIRST AID AT WORK)

LITHIUM BATTERIES DANGEROUS GOODS AWARENESS

The aim of this course is to confirm knowledge of the regulations governing the transport of lithium batteries. This course will cover basic theory and practical aspects of dangerous goods transport.

DRIVER CPC MODULE 4 (HAZARDOUS SUBSTANCES & THE DRIVER)

DRIVER CPC MODULE 1 (LOAD SAFELY & DRIVERS HOURS)

To provide Drivers with the instruction required by the Driving Standards Agency (DSA) and JAUPT in order to obtain their Driver Qualification Card (DQC). Driver CPC training is a requirements for most LGV drivers under the new Driver CPC Regulations. Drivers are...

DANGEROUS GOODS BY AIR REFRESHER (CAA / IATA APPROVED)

The objective of this course is to ensure that students can prepare a Dangerous Goods Shipment in accordance with the Requirements of the IATA Dangerous Goods regulations or verify that a Dangerous Goods Shipment has been...

DANGEROUS GOODS BY SEA (RADIOACTIVES)

To train Shippers/Cargo Agents and Acceptance Staff in the Safe Transportation of Radioactive material by sea. Shippers/Cargo Agents and Acceptance staff responsible for radioactive shipments.

Working at Height

DROPPED OBJECT AWARENESS

This half day course provides personnel with a thorough understanding of the potential hazards and management controls required to eliminate injury and damage from dropped objects. The course combines classroom-based and practical learning, although the emphasis is on...

PASMA TOWERS FOR USERS

This course has been designed to provide personnel who will be responsible for the assembly, dismantling, alteration, moving and inspecting of mobile access towers with the required knowledge and understanding to conduct these tasks safely and to obtain their PASMA...

WORK AT HEIGHT SAFETY AWARENESS UNIT 2

This one-day course introduces the principles and equipment involved in work at height systems and, through a combination of classroom and practical work, the process of a safe and systematic approach to working at height operations.The course is aimed at Safety...

WORK AT HEIGHT UNIT 6 – PFPE

This course is designed to introduce candidates who are actively involved in the control of working at height equipment to the requirements of the appropriate regulations. Comprising a mixture of theory and practical work; candidates will be assessed during the course...

WORK AT HEIGHT UNIT 3 – RESCUE AT HEIGHT

PRACTICAL MANAGEMENT OF WORK AT HEIGHT UNIT 7

This course is designed for candidates who are actively involved in Working at Height and also management and supervisory roles to ensure compliance with working at regulations. It provides an outline of the legislation, equipment standards, the process of a safe and...

HARNESS USER

This two-hour course introduces the principles and equipment involved in work at height in harnesses. Additional training elements (e.g. working with ladders), can be included according to client requirements. The course is aimed at all personnel who work at height...

WORK AT HEIGHT UNIT 4 – FOR MANAGERS & SUPERVISORS

This one-day course will provide delegates with an understanding of the roles, responsibilities and requirements for a safe and systematic approach to working at height operations. A mixture of theory and practical work the course is aimed at Managers, Safety...

WORK AT HEIGHT SAFETY AWARENESS UNIT 1

This is a classroom based course that introduces delegates to the details of working at height safely. Certificates are awarded after successful completion of the course and will be valid for a three year period, after which recertification must take place.

PERSONAL FALL PROTECTION EQUIPMENT INSPECTION